Car care

TE02505 TE02506
TE02505
TE02506

RALLY heat resistant paint aerosol silver

Colour:
Product code: TE02505
Packaging:
Package: 10pcs.

The aerosol is suitable for the painting of steel surfaces subject to at least 150°C (302°F), such as silencers, engines, piping or boilers.   

After sufficient baking, it is heat-resistant up to 650°C (1202°F).

After a heat treatment at 150°C (302°F) for at least 20 minutes, which can be performed by the operational heating of the painted surface, it forms a hard protective coating with good hiding power and adhesion. 

The paint can be applied on acid-proof and heat resistant steel surfaces up to the temperature indicated on the lid of an identical colour with the paint. 

It is sufficient for a surface of 2-2.5 m2 (21.5-27 sqft) in a single layer.

    Other product info

    ADVICE FOR PAINTING, AEROSOL TECHNIQUES

    The basis of painting is the appropriate preparation of the surface (polishing, degreasing and roughening), as the new decoration will be durable and of high-quality only on a well-prepared surface.

    The paint shall be applied on a cleaned and dry surface, preferably at 20-25°C. Before starting painting, shake the bottle until at least 1 minute to let the material therein homogenise.

    Spray the surface evenly and softly from a distance of 20-30 cm (8-12 inch). Even covering can be achieved by cross-spraying. During spraying, cross the border of the surface to be painted in case of each change of direction.

    The material in the aerosol is significantly more diluted than the standard paints for the sake of good applicability, therefore, it is prone to streaming. Upon application, ensure to spray only a thin layer at the same time onto the surface. This can be repeated multiple times after a short drying time.

    In case of the incidental clogging of the valve or after finishing painting, flush the nozzle with the propellant: operate the bottle upside down for 2-3 seconds.

    Make sure of the perfect quality of the MAESTRO aerosol paints and of the usefulness of the recommendations above.

    Keep up the good work!

    The easier use of the MAESTRO aerosol paints are supported by practical row of pictogram on the can.

    Using instructions

    • Thoroughly sand the surface with an at least P80 emery cloth.  The paint shall be applied on a cleaned, degreased and dry surface, preferably at 20-25°C (68-77°F)! 


    • Shake the bottle for 1 minute after the start of the movement of the balls.


    •  Spray the surface evenly and softly, which can be resprayed after 15 minutes of drying time. 

      In case of the incidental clogging of the valve, operate the bottle by turning the nozzle. After use, operate the bottle upside down for 2-3 seconds. 


    • The coating is hardened only after a 150°C (302°F) heat treatment for at least 20 minutes, which may occur by the operational heating of the painted surface.


    Comments

If you would like to write a comment please sign in!
Loading

    Questions, answers

    If you want to write a question please sign in!
    Loading

Similar products

PREVENT heat resistant paint aerosol
PREVENT heat resistant paint aerosol