Car care

TE02479

PREVENT primer filler aerosol

Product code: TE02479
Packaging: 400 ml
Package: 5pcs.

The aerosol is suitable for filling and priming the roughness and scratches of metal, wood and certain plastic surfaces. It ensures a hard but flexible coating of good hiding power and excellent adhesion. 

Depending on the depth of the scratches and the roughness, apply in multiple layers. 

1 hour after drying, it can be sanded and repainted. 

Subtle differences may appear between the colour of the coating and the lid.

    Other product info

    ADVICE FOR PAINTING, AEROSOL TECHNIQUES

    The basis of painting is the appropriate preparation of the surface (polishing, degreasing and roughening), as the new decoration will be durable and of high-quality only on a well-prepared surface.

    The paint shall be applied on a cleaned and dry surface, preferably at 20-25°C. Before starting painting, shake the bottle until at least 1 minute to let the material therein homogenise.

    Spray the surface evenly and softly from a distance of 20-30 cm (8-12 inch). Even covering can be achieved by cross-spraying. During spraying, cross the border of the surface to be painted in case of each change of direction.

    The material in the aerosol is significantly more diluted than the standard paints for the sake of good applicability, therefore, it is prone to streaming. Upon application, ensure to spray only a thin layer at the same time onto the surface. This can be repeated multiple times after a short drying time.

    In case of the incidental clogging of the valve or after finishing painting, flush the nozzle with the propellant: operate the bottle upside down for 2-3 seconds.

    Make sure of the perfect quality of the MAESTRO aerosol paints and of the usefulness of the recommendations above.

    Keep up the good work!

    The easier use of the MAESTRO aerosol paints are supported by practical row of pictogram on the can.

    Using instructions

    • The primer filler must be applied on a sanded, cleaned, degreased and dry surface, preferably at 20-25°C (68-77°F). 


    • Shake the bottle for 1 minute after the start of the movement of the balls. 


    • Spray the surface evenly and softly, which can be resprayed after 10 minutes of drying time. 


    • In case of the incidental clogging of the valve, operate the bottle by turning the nozzle. 


    • After use, operate the bottle upside down for 2-3 seconds.


    Comments

If you would like to write a comment please sign in!
Loading

    Questions, answers

    If you want to write a question please sign in!
    Loading

Similar products
PREVENT underbody coat aerosol
PREVENT underbody coat aerosol
PREVENT zinc spray
PREVENT zinc spray