MAESTRO nitrolacquer aerosol colourless

Product code: TE01518

Packaging: 400 ml

Package: 5pcs.

The transparent MAESTRO nitro lacquer forms an exceptionally hard and resistant protection layer. The shiny lacquer coating is fuel, detergent and heat resistant for up to 90 °C. It can be used on wooden surfaces or to add a decorative and protective layer to surfaces painted with mat MAESTRO paints. Do not use on shiny finishes. Sprayed surfaces can be re-coated after a 10 minutes drying period.

Other product info

ADVICE FOR PAINTING, AEROSOL TECHNIQUES

The basis of painting is the appropriate preparation of the surface (polishing, degreasing and roughening), as the new decoration will be durable and of high-quality only on a well-prepared surface.

The paint shall be applied on a cleaned and dry surface, preferably at 20-25°C. Before starting painting, shake the bottle until at least 1 minute to let the material therein homogenise.

Spray the surface evenly and softly from a distance of 20-30 cm (8-12 inch). Even covering can be achieved by cross-spraying. During spraying, cross the border of the surface to be painted in case of each change of direction.

The material in the aerosol is significantly more diluted than the standard paints for the sake of good applicability, therefore, it is prone to streaming. Upon application, ensure to spray only a thin layer at the same time onto the surface. This can be repeated multiple times after a short drying time.

In case of the incidental clogging of the valve or after finishing painting, flush the nozzle with the propellant: operate the bottle upside down for 2-3 seconds.

Make sure of the perfect quality of the MAESTRO aerosol paints and of the usefulness of the recommendations above.

Keep up the good work!

The easier use of the MAESTRO aerosol paints are supported by practical row of pictogram on the can.

Using instructions

Before lacquering, polish the surface flat.
Only use on a cleaned and dry surface.
Shake the bottle for 1 minute after the start of the movement of the balls.
Spray evenly and finely the prepared surface which can be re-coated after a drying period of at least 10 minutes.

In case of the incidental clogging of the valve, operate the bottle by turning the nozzle.
After use, operate the bottle upside down for 2-3 seconds.

Comments

If you would like to write a comment please sign in!

Questions, answers

If you want to write a question please sign in!

Hobby, DIY paint aerosols

MAESTRO nitrolacquer aerosol colourless

Other product info

Using instructions

Before lacquering, polish the surface flat.

Only use on a cleaned and dry surface.

Shake the bottle for 1 minute after the start of the movement of the balls.

Spray evenly and finely the prepared surface which can be re-coated after a drying period of at least 10 minutes.

After use, operate the bottle upside down for 2-3 seconds.

Comments

Questions, answers

Similar products