MAESTRO Metal effect lacquer aerosol

Colour:

Product code: TE02693

Packaging: 400 ml

Package: 5pcs.

The aerosol is suitable for lacquering surfaces painted with MAESTRO shiny acrylic paint in order to form subsequent metallic gloss. It can be widely applied: among other things, it can be used for decoration purposes, creative arts of florists, hobby users, preparation of holiday decoration.

The coating dries quickly, adheres well and provides protection for the layer of the acrylic paint. The final appearance of the effect depends on the number of layers; perform trial spraying prior to the application.

Other product info

ADVICE FOR PAINTING, AEROSOL TECHNIQUES

The basis of painting is the appropriate preparation of the surface (polishing, degreasing and roughening), as the new decoration will be durable and of high-quality only on a well-prepared surface.

The paint shall be applied on a cleaned and dry surface, preferably at 20-25°C. Before starting painting, shake the bottle until at least 1 minute to let the material therein homogenise.

Spray the surface evenly and softly from a distance of 20-30 cm (8-12 inch). Even covering can be achieved by cross-spraying. During spraying, cross the border of the surface to be painted in case of each change of direction.

The material in the aerosol is significantly more diluted than the standard paints for the sake of good applicability, therefore, it is prone to streaming. Upon application, ensure to spray only a thin layer at the same time onto the surface. This can be repeated multiple times after a short drying time.

In case of the incidental clogging of the valve or after finishing painting, flush the nozzle with the propellant: operate the bottle upside down for 2-3 seconds.

Make sure of the perfect quality of the MAESTRO aerosol paints and of the usefulness of the recommendations above.

Keep up the good work!

The easier use of the MAESTRO aerosol paints are supported by practical row of pictogram on the can.

Using instructions

Apply the lacquer on a dry, silicone and dust-free surface at 20-25°C if possible.
Shake the bottle for 1 minute from the start of the balls.
Spray the surface uniformly, lightly from 15-20 cm distance. When applying it, be careful to spray only one light layer at a time on the surface by means of cross spraying.
Allow min. 10 minutes’ drying time between the layers.
In case of any possible valve clogging or when you finish painting, flush the nozzle with the propellant: operate the bottle with the nozzle facing downwards for 2-3 seconds, while in case of valve clogging, operate the aerosol with the nozzle turned off.

Comments

If you would like to write a comment please sign in!

Questions, answers

If you want to write a question please sign in!

Hobby, DIY paint aerosols

MAESTRO Metal effect lacquer aerosol

Other product info

Using instructions

Apply the lacquer on a dry, silicone and dust-free surface at 20-25°C if possible.

Shake the bottle for 1 minute from the start of the balls.

Spray the surface uniformly, lightly from 15-20 cm distance. When applying it, be careful to spray only one light layer at a time on the surface by means of cross spraying.

Allow min. 10 minutes’ drying time between the layers.

In case of any possible valve clogging or when you finish painting, flush the nozzle with the propellant: operate the bottle with the nozzle facing downwards for 2-3 seconds, while in case of valve clogging, operate the aerosol with the nozzle turned off.

Comments

Questions, answers

Similar products