Hobby, DIY paint aerosols

TE01592 TE01593 TE01594
TE01592
TE01593
TE01594

MAESTRO gas convector paint white 9016 aerosol

Colour:
Product code: TE01592
Packaging:
Package: 5pcs.

Recommended for the coating of gas convectors or any other steel surfaces where operation temperatures do not exceed 200 °C. The Gas Convector Paint forms a quick drying surface with excellent adhesive qualities. The gained grease-shiny surface is water and detergent resistant. The product will reach its maximum hardness after 7 days so the treated surface should not be exposed to heavy duty use and protected against mechanical damages such as frictions and scratches during this period. It is recommended to do a compatibility test before carry out any repair jobs. For better adhesion, the surface to be painted needs to be sanded first with a fine grade (P120) emery-cloth.

    Other product info

    ADVICE FOR PAINTING, AEROSOL TECHNIQUES

    The basis of painting is the appropriate preparation of the surface (polishing, degreasing and roughening), as the new decoration will be durable and of high-quality only on a well-prepared surface.

    The paint shall be applied on a cleaned and dry surface, preferably at 20-25°C. Before starting painting, shake the bottle until at least 1 minute to let the material therein homogenise.

    Spray the surface evenly and softly from a distance of 20-30 cm (8-12 inch). Even covering can be achieved by cross-spraying. During spraying, cross the border of the surface to be painted in case of each change of direction.

    The material in the aerosol is significantly more diluted than the standard paints for the sake of good applicability, therefore, it is prone to streaming. Upon application, ensure to spray only a thin layer at the same time onto the surface. This can be repeated multiple times after a short drying time.

    In case of the incidental clogging of the valve or after finishing painting, flush the nozzle with the propellant: operate the bottle upside down for 2-3 seconds.

    Make sure of the perfect quality of the MAESTRO aerosol paints and of the usefulness of the recommendations above.

    Keep up the good work!

    The easier use of the MAESTRO aerosol paints are supported by practical row of pictogram on the can.

    Using instructions

    • Thoroughly sand the surface with at least P120 emery cloth. 


    • The paint shall be applied on a cleaned and dry surface, preferably at 20-25 °C!


    •  Shake the bottle for 1 minute after the start of the movement of the balls. 


    • By keeping the bottle vertically, spray the surface evenly and softly from a distance of about 20 cm (8 inch), which can be resprayed after 10 minutes of drying time. 

      In case of the incidental clogging of the valve, operate the bottle by turning the nozzle.

    • After use, operate the bottle upside down for 2-3 seconds.


    Comments

If you would like to write a comment please sign in!
Loading

    Questions, answers

    If you want to write a question please sign in!
    Loading

Similar products

MAESTRO radiator paint aerosol
MAESTRO radiator paint aerosol