MAESTRO white primer is a universal paint primer. It is recommended to pre-treat surfaces with a primer before applying other MAESTRO paints (like acrylic, luminescent, glitter, metallic paints or lacquers).
Do not use it under heat resistant, radiator and gas convector paints. It can be used on wood, metal, glass and certain plastic surfaces.
Treatment with a primer will increase the covering and adhesive qualities of the coating paint besides making its use more economical. Treated surfaces can be resprayed after 10 minutes. The covering paint layer can be applied after a 2 hours drying period.
ADVICE FOR PAINTING, AEROSOL TECHNIQUES
The basis of painting is the appropriate preparation of the surface (polishing, degreasing and roughening), as the new decoration will be durable and of high-quality only on a well-prepared surface.
The paint shall be applied on a cleaned and dry surface, preferably at 20-25°C. Before starting painting, shake the bottle until at least 1 minute to let the material therein homogenise.
Spray the surface evenly and softly from a distance of 20-30 cm (8-12 inch). Even covering can be achieved by cross-spraying. During spraying, cross the border of the surface to be painted in case of each change of direction.
The material in the aerosol is significantly more diluted than the standard paints for the sake of good applicability, therefore, it is prone to streaming. Upon application, ensure to spray only a thin layer at the same time onto the surface. This can be repeated multiple times after a short drying time.
In case of the incidental clogging of the valve or after finishing painting, flush the nozzle with the propellant: operate the bottle upside down for 2-3 seconds.
Make sure of the perfect quality of the MAESTRO aerosol paints and of the usefulness of the recommendations above.
Keep up the good work!
The easier use of the MAESTRO aerosol paints are supported by practical row of pictogram on the can.
Apply the paint on a dry surface.
Spray the surface thinly, which can be resprayed after 10 minutes of drying time.
After 2 hours of drying, sanding with an emery grade 400 is recommended.
In case of the incidental clogging of the valve, operate the bottle by turning the nozzle.
