MAESTRO acrylic paint luminating green 6035 aerosol

Colour:

Product code: TE01591

Packaging:

Package: 5pcs.

MAESTRO neon effect paint will lend an intensive colour to painted surfaces. It is a quick drying, economic and very attractive paint.

Primarily designed to provide an eye-catching appearance to signs, advertisement, sporting accessories, etc. The product can be used for all purposes where extended chemical resistance and colour resistance is not required.

The paint should be used under circumstances where temperatures do not exceed 90ºC and the painted surface comes not in contact with water (it is not recommended for boats for example). Please note that the Luminescent paint is sensitive to UV-radiation.

For non-white surfaces use MAESTRO white primer before applying Luminescent paints.

It can be used on wooden, glass, ceramic and certain plastic surfaces. For outdoor applications the painted surfaces should be sprayed with MAESTRO Nitro or Acrylic Lacquer to improve the weather resistance of the luminescent paint. An added nitro lacquer layer provides fuel resistance to the painted surface.

Other product info

ADVICE FOR PAINTING, AEROSOL TECHNIQUES

The basis of painting is the appropriate preparation of the surface (polishing, degreasing and roughening), as the new decoration will be durable and of high-quality only on a well-prepared surface.

The paint shall be applied on a cleaned and dry surface, preferably at 20-25°C. Before starting painting, shake the bottle until at least 1 minute to let the material therein homogenise.

Spray the surface evenly and softly from a distance of 20-30 cm (8-12 inch). Even covering can be achieved by cross-spraying. During spraying, cross the border of the surface to be painted in case of each change of direction.

The material in the aerosol is significantly more diluted than the standard paints for the sake of good applicability, therefore, it is prone to streaming. Upon application, ensure to spray only a thin layer at the same time onto the surface. This can be repeated multiple times after a short drying time.

In case of the incidental clogging of the valve or after finishing painting, flush the nozzle with the propellant: operate the bottle upside down for 2-3 seconds.

Make sure of the perfect quality of the MAESTRO aerosol paints and of the usefulness of the recommendations above.

Keep up the good work!

The easier use of the MAESTRO aerosol paints are supported by practical row of pictogram on the can.

Using instructions

The ideal temperature for use is 20-25°C (68-77°F).
Apply the paint on grease-free, oil-free, rust-free, sanded and dry surface.
Shake the bottle for 1 minute after the start of the movement of the balls. By keeping the bottle vertically, spray the surface evenly and softly from a distance of about 20 cm (8 inch), which can be resprayed after 10 minutes of drying time.
After 12 hours, it can be repainted by MAESTRO nitro lacquer or acrylic lacquer.

In case of the incidental clogging of the valve, operate the bottle by turning the nozzle.
After use, operate the bottle upside down for 2-3 seconds.

Comments

If you would like to write a comment please sign in!

Questions, answers

If you want to write a question please sign in!

Hobby, DIY paint aerosols

MAESTRO acrylic paint luminating green 6035 aerosol

Other product info

Using instructions

The ideal temperature for use is 20-25°C (68-77°F).

Apply the paint on grease-free, oil-free, rust-free, sanded and dry surface.

Shake the bottle for 1 minute after the start of the movement of the balls. By keeping the bottle vertically, spray the surface evenly and softly from a distance of about 20 cm (8 inch), which can be resprayed after 10 minutes of drying time.

After 12 hours, it can be repainted by MAESTRO nitro lacquer or acrylic lacquer.

After use, operate the bottle upside down for 2-3 seconds.

Comments

Questions, answers

Similar products