Hobby, DIY paint aerosols

TE00938 TE01516 TE02295 TE02733 TE02734 TE2748
TE00938
TE01516
TE02295
TE02733
TE02734
TE2748

MAESTRO acrylic paint dull black aerosol

Colour:
Product code: TE00938
Packaging:
Package: 10pcs.

It can be used for painting and decorating surfaces treated first with MAESTRO primers.The flat acrylic paint is suited for in- and outdoor use alike. 

If it is used outdoors, it is necessary to ground steel surfaces with MAESTRO Zinc Primer first. 

The Mat Acrylic Paint dries quickly, has excellent adhesive and coating qualities and provides heat resistance for up to 70 °C. Sprayed surfaces can be re-coated after a 10 minute drying period. 

For additional shine and protection, use MAESTRO Acrylic Lacquer  or Nitro Lacquer. Lacquers can be applied after 12 hours.

    Other product info

    ADVICE FOR PAINTING, AEROSOL TECHNIQUES

    The basis of painting is the appropriate preparation of the surface (polishing, degreasing and roughening), as the new decoration will be durable and of high-quality only on a well-prepared surface.

    The paint shall be applied on a cleaned and dry surface, preferably at 20-25°C. Before starting painting, shake the bottle until at least 1 minute to let the material therein homogenise.

    Spray the surface evenly and softly from a distance of 20-30 cm (8-12 inch). Even covering can be achieved by cross-spraying. During spraying, cross the border of the surface to be painted in case of each change of direction.

    The material in the aerosol is significantly more diluted than the standard paints for the sake of good applicability, therefore, it is prone to streaming. Upon application, ensure to spray only a thin layer at the same time onto the surface. This can be repeated multiple times after a short drying time.

    In case of the incidental clogging of the valve or after finishing painting, flush the nozzle with the propellant: operate the bottle upside down for 2-3 seconds.

    Make sure of the perfect quality of the MAESTRO aerosol paints and of the usefulness of the recommendations above.

    Keep up the good work!

    The easier use of the MAESTRO aerosol paints are supported by practical row of pictogram on the can.

    Using instructions

    • The paint shall be applied on a cleaned and dry surface, preferably at 20-25 °C (68-77°F)!


    •  Shake the bottle for 1 minute after the start of the movement of the balls. 


    • Spray the surface evenly and softly, which can be resprayed after 10 minutes of drying time. 


    • After 12 hours, it can be repainted by flat or shiny acrylic lacquer.

       By spraying the surface by MAESTRO nitro lacquer, the surface becomes shiny and resistant to fuels. 

    • After use, operate the bottle upside down for 2-3 seconds.


    Comments

If you would like to write a comment please sign in!
Loading

    Questions, answers

    If you want to write a question please sign in!
    Loading